yellow flashing solar panel arrow board led lights
Basic Info
Model No.: WDM-SDXP-C50-17Y-1
Product Description
yellow flashing solar panel Arrow board led lights
The portable yellow flashing solar panel arrow board led lights is composed of a box, a solar panel, two brackets, four red and blue flash modules and multiple C50 pixel tubes. The flash modules are composed of large lenses and have high brightness. The C50 pixel tube is our exclusive mold-opening shell. It has a unique shape and is composed of 6 LEDs. The LED lamp beads are covered with an exquisite lens plastic shell. The solar panel uses 15W/18V monocrystalline silicon, which has strong heat absorption and sufficient charging.
Uses of portable solar construction guide signs:
The portable yellow flashing solar panel arrow board led lights is the construction arrow guide sign indicator, which is mainly used for various road construction instructions, engineering vehicles, municipal vehicles, garbage trucks, etc., to indicate that the vehicle is in operation or the road section is under construction, such as installing street lights, signal lights, Guide passing vehicles to pass safely and quickly. Or it can be used for road sections with potential safety hazards, such as curved roads, rain and fog road sections, and highways. With a controller to adjust the arrow direction, simple and convenient operation.
Main advantages and technical instructions of the portable yellow flashing solar panel arrow board led lights:
1. Mainly used for engineering vehicles, municipal vehicles, garbage trucks, etc. Using Taiwan Epistar chip lamp beads, using C50 LED pixel tube arrangement, each lamp tube has 6 lamp beads, super high brightness, good visual effect.
2. The shell is aluminum, and the shell is aluminum. It is fully enclosed, all-weather, weatherproof, with good oxidation resistance, and the equipment will not fade or rust during the use period.
3. Completely waterproof: waterproof glue is applied to the connection between the display and the cabinet on the surface of the product to improve the waterproof performance of the product.
4. This product is powered by solar energy, which is environmentally friendly.
5. Strict aging: verify the aging 24 hours before the product is shipped, and the performance is more superior!
6. Display mode: there are three display modes, namely full light, left arrow, right arrow
7. Easy to install: It can be put on the road or on the car by using the bracket to move easily. There is an aluminum groove on the back, and it can also be installed with a back hoop.
Shenzhen Wide Way Optoelectronics Co., Ltd., a provider and manufacturer of high-quality traffic lights!
Field Installation Instructions for the portable yellow flashing solar panel arrow board led lights:
The installation method of the vehicle-mounted portable yellow flashing solar panel arrow board led lights can be customized, and the most commonly used is the hoop installation.
Installation of the portable yellow flashing solar panel arrow board led lights hoop:
The first type: If your car does not have a pillar, you can install the bracket bar as shown in the picture on the left, and fix the guide plate on the bracket bar with a screw. Fix the guide plate on the bracket bar with a screw. (First put the screw into the guide brand aluminum slot, then pass the screw through the hole of the bracket bar, put the shrapnel, washer, nut, and then tighten the nut).
The second type: Install three L-shaped brackets on the car roof at suitable positions, install three aluminum bars on the three L-shaped brackets, punch holes in the aluminum bars that are aligned with the L-shaped brackets, and then fix the aluminum bars on the On the L-shaped bracket (first pass the screw through the aluminum bar and the hole on the L-shaped bracket, insert the shrapnel, washer, and nut, and then tighten the nut). As shown below on the right.
The third type: install two aluminum bars directly on the roof of the car, make two holes in the appropriate positions of the aluminum bar to facilitate the installation of the aluminum bar on the car, fix the aluminum bar with screws, and then fix the guide plate with a hoop On the aluminum bar. Pass the end of the screw with the nut through the aluminum slot on the back of the guide plate, and then align the hoop around the aluminum bar with the screws on the aluminum slot, that is, insert the holes at both ends of the hoop into the two sides of the aluminum bar. On the screw, screw on the shrapnel, washer, and nut, and then tighten it. As shown below.
portable yellow flashing solar panel arrow board led lights bracket installation
When installing with a bracket, put two screws on each side of the guide plate to install the bracket. When installing, put the bracket on the screw on both sides of the guide plate, and then fix the bracket with a nut.
Wiring installation instructions for the portable yellow flashing solar panel arrow board led lights:
The portable solar construction guide card is solar powered. The solar panel wiring and the wiring of the guide plate can be connected through the docking interface. Pay attention to the position of the concave and convex openings when docking the interface, you need to align them, otherwise the positive and negative poles will be reversed, and the battery will not be charged.
It adopts switch button control, as shown in the figure above, the button is set at the bottom of the guide plate. The buttons from left to right in the figure are the main switch, the light control switch, the strobe switch, the left arrow switch, and the right arrow switch.
Application scenarios of the portable yellow flashing solar panel arrow board led lights:
Field case of portable yellow flashing solar panel arrow board led lights:
Traffic Arrow Sign Board
Arrow Sign Board
Led Arrow Sign Board
Truck Mounted LED Arrow Board
Traffic Yellow Led Arrow Board
Traffic Safety Led Arrow Board
Engineering Vehicle Arrow Lamp
Vehicle Arrow Lamp
Vehicle Traffic Arrow Lamp
Product Categories : Led Arrow Board > Customized Arrow Board